TUFF SPAS TT450 PLATINUM
TUFF SPAS TT450 PLATINUM
SEATS | SIZE | JETS | PUMPS |
---|---|---|---|
4-7 | 77″ x 77″ x 35″ | 50 | 2x 4hp |
ELECTRIC | WATER CAPACITY | DRY WEIGHT |
---|---|---|
220V/50A GFCI | 350 US Gallons | 560 lbs |
GET A QUOTE ON THE TUFF SPAS TT450 PLATINUM
Interested in the Tuff Spas TT450 Platinum spa? Complete the form and we’ll be in touch with a quote plus estimated delivery charges and a delivery timeframe. Note we can only sell, deliver and install in select Southern California counties.
Thank you for your interest in Custom Spas Direct!
LEARN MORE ABOUT THE TT450 PLATINUM
PHYSICAL CLEARANCES
Width: 33″
Height: 85″
These clearances MUST be continuous from the street to the final spa location unless using a Crane. For more information, please visit our Prep Location page.
SPA FOUNDATION
The Hot Tub must have a solid, level foundation.
- 4-inch thick Concrete (recommended)
- Handi-Pad (PURCHASE HERE)
Hot tub must be level for consistent water level and proper filtration.
ELECTRICAL
220V/50A GFCI
2 Hots 8 Gauge (black/red)
1 Neutral 8 Gauge (white)
1 Ground 10 Gauge (green)
All circuits MUST be GFI protected at the main electrical panel or at a remote disconnect.
Must include SealTite whip at spa end with wires extending at least 6″ past end of SealTite. Length of SealTite whip must be long enough to reach the Control Pack (See Spa Diagram for the location of the Control Pack)
For more information on spa electrical requirements, please visit our Spa Electric page.