Built for family-style comfort with unmatched quality, our Comfort Collection features deep water stream back channels for maximum enjoyment. Also, enjoy the LED back-lit water fountain and LED illuminated footwell.

This 6-7 person hot tub has 23 adjustable jets that target shoulders, back muscles and feet for a massaging hydrotherapy experience. Enjoy the comfort pillow headrests to enhance your relaxation. For entertaining or unwinding, the Fountain with Backlit LED Light and 8 exterior corner lights allow you to set the perfect mood.

The durable, lightweight spa comes in four color combinations of Syncrylic™ diamond body colors with complementary cabinet panels and trims to blend beautifully into any outdoor or patio environment. Syncrylic™ is a proprietary formula designed to be lighter and more durable than standard acrylic. Syncrylic™ was created to offer the best of both worlds, having the beautiful appearance of acrylic while maintaining the tough, impact-resistant qualities of polyethylene.

Select the perfect temperature, jet speed and lighting scheme using the Digital Controls. The spa is powered by a 2 HPR pump***. The Weather Shield Cover is lighter than traditional vinyl covers and is well insulated to seal in the heat, keep out debris and protect your spa for peace of mind. Each spa comes with cover seal strap latch clamps for extra security. Come home to the elegant Comfort 2300L, the ultimate for relaxation, entertainment and family fun.

Seating: 6-7 person
Dimensions*: 82″ x 82″ x 32 / 208 x 208 x 81 cm
Spa Volume: 250 Gallons / 950 Litres
Dry Weight: 324 lbs. / 147 kg
Jets: 23 Adjustable SST
Pillows: 4
Electrical: 120V-15amp/240V-40amp
Heating: 1kw/4kw
Controls: Digital
Pump(s)***: 2 HPR 2 Spd

Water Feature: Fountain w LED Light
Exterior Lighting: 8 LED Corner Lights
Interior Lighting: LED Footwell Light
Easy Kleen Ozone: Optional
Insulation: Foam Barrier
Cover: Weather Shield
Suite Steps & Handrail: Not Included
Cover Lifter: Not Included

*Dimensions vary +/- .5″. Specifications, including dimensions, weight and volume, will vary and are subject to change without notice. Colors may be different than shown.

**The 2300S Spa ships Plug and Play for 120-Volt 15 Amp with a 1kW heater. The heater can be converted from a 120-Volt 1kW with the installation of a 40 Amp 240-Volt electrical service by a certified electrician.

***HPR denotes High-Performance Rated. Actual continuous duty horsepower varies depending on the model. Consult the manufacturer for more details.

Width: 38″
Height: 110″

These clearances MUST be continuous from the street to the final spa location unless using a Crane. For more information, please visit our Prep Location page.

The Hot Tub must have a solid, level foundation.

• 4-inch thick Concrete (recommended)
• Handi-Pad (PURCHASE HERE)

Hot tub must be level for consistent water level and proper filtration.

120V 15 amp
240V 40 amp

2 Hots 8 Gauge (black/red)
1 Neutral 8 Gauge (white)
1 Ground 10 Gauge (green)

All circuits MUST be GFI protected at the main electrical panel or at a remote disconnect.

Must include SealTite whip at spa end with wires extending at least 6″ past end of SealTite. Length of SealTite whip must be long enough to reach the Control Pack (See Spa Diagram for the location of the Control Pack)

For more information on spa electrical requirements, please visit our Spa Electric page.