American Whirlpool 171 Specs and Parts

AMERICAN WHIRLPOOL 171 SPA

AMERICAN WHIRLPOOL MODEL 171

With spacious seating for up to six people, the American Whirlpool® 171 has a luxurious lounge with foot jets, as well as two other corner massage seats to provide back relief from multiple locations.

SEATS	SIZE	JETS	PUMPS
5-6	83″ x 83″ x 36″	40	2x 5bHP

ELECTRIC	WATER CAPACITY	WEIGHT (E/F)
240V/50A	336 US Gallons	800 / 3844 lbs

GET A QUOTE ON THE AMERICAN WHIRLPOOL 171 SPA

Interested in the American Whirlpool 171 spa? Complete the form and we’ll be in touch with a quote plus estimated delivery charges and a delivery timeframe. Note we can only sell, deliver and install in select Southern California counties.

Thank you for your interest in Custom Spas Direct!

LEARN MORE ABOUT THE 171

CLICK TO VIEW THE 171'S KEY FEATURES

Pump 1: 56 Frame 2-Speed 5bHp, 240VAmerican Whirlpool is the first fully-electronic hot tub, including the pumps, which prolongs overall life of the spa.

Pump 2: 56 Frame 1-Speed 5bHp, 240VAmerican Whirlpool is the first fully-electronic hot tub, including the pumps, which prolongs overall life of the spa.

DuraMAAX™ CabinetryDuraMAAx® is a state of the art wood-alternative material that has the look and feel of natural wood, without the maintenance. The material is impact resistant, impervious to weather or insect damage and will never splinter, crack, or rot. The attractive exterior locks in heat and seals out cold air providing a beautiful look and feel.

Freeze Protection SystemIf the temperature sensors within the heater detect a low enough temperature, then the spa control system will automatically activate the pumps to provide freeze protection. Moving water is unable to freeze, so the system will either run the pumps continuously or periodically depending on conditions.

Overheat Protection SystemWhen sensing a water temperature above 108°F (42°C), the system will automatically shut down the heater until the temperature falls below 108°F (42°C). Once below 108°F (42°C), the system will resume normal operation.

Programmable Filter CyclesProgrammable filter cycles allow spa users to designate when it is most convenient for the spa to clean itself and can utilize their system for an extra clean spa before guests arrive.

3.5″ LED Underwater Spa LightA 3.5-inch LED light in the footwell of the spa provides a mood-setting effect of your choice.

UPGRADE OPTION: CleanZone® SystemThe CleanZone® water purification system generates ozone to maintain healthy, crystal clear water while greatly reducing chemical maintenance.

LoungeLounge seats provide a reclined seating option with a head cushion and varying jet to promote complete relaxation.

Thermo-Lock™ InsulationThermo-Lock Insulation combines the elements of the ABS Sealed base, BlueMAAX, and the WeatherShield cover to lock in the heat of your spa from top to bottom.

Treated Wood FrameSpecially formulated preservatives are saturated deep into the wood to protect against rot and infestation, ensuring the long-term structural integrity of your spa.

Dynamic LED LightingThe large LED light in the footwell of the spa sets the mood for the entire spa.

HDPE Sealed BaseThe ABS Sealed base is an integral part of the support structure in an American Whirlpool® hot tub. Its one-piece construction provides a rugged foundation that seals the bottom of the spa, locking in heat and blocking out moisture.

CLICK TO VIEW THE ACRYLIC COLOR OPTIONS

CLICK FOR SITE PREPARATION FOR YOUR NEW 171

PHYSICAL CLEARANCES

Width: 38″
Height: 85″

These clearances MUST be continuous from the street to the final spa location unless using a Crane. For more information, please visit our Prep Location page.

SPA FOUNDATION

The Hot Tub must have a solid, level foundation.

4-inch thick Concrete (recommended)
Handi-Pad (PURCHASE HERE)

Hot tub must be level for consistent water level and proper filtration.

ELECTRICAL

240V / 50A

2 Hots 8 Gauge (black/red)
1 Neutral 8 Gauge (white)
1 Ground 10 Gauge (green)

All circuits MUST be GFI protected at the main electrical panel or at a remote disconnect.

Must include SealTite whip at spa end with wires extending at least 6″ past end of SealTite. Length of SealTite whip must be long enough to reach the Control Pack (See Spa Diagram for the location of the Control Pack)

For more information on spa electrical requirements, please visit our Spa Electric page.

SEATING DEPTH CHART

DOWNLOAD CHART

CLICK FOR WARRANTY INFORMATION

WARRANTY CARD

DOWNLOAD

WARRANTY TERMS

ITEM	DURATION
Limited Vessel Structure Warranty	1 year
Limited Surface Warranty	1 year
Limited Equipment, Plumbing Warranty	1 year
Limited Jet Insert Warranty	1 year
Limited Side Panel Warranty	1 year
Limited Digital Optics Warranty	1 year
UPGRADES – Limited Warranty	1 year
Limited Headrest, Skimmer Lid, & Diverter Valve Warranty	90 days

Cart