Steel Frame

The MAXX Spas® Steel Sub-Structure is a key feature of the Relaxation line of spas.  Engineered to exact tolerances, it allows for complete integration of all the systems of the spa.  The lightweight, high-strength steel frame will never rot, warp, split or crack.  It will never expand or contract with moisture, which over time can damage the spa’s exterior.  A 250% superior strength to weight ratio over conventional wood frames provides you with a lighter and stronger unit.  Plus, with the addition of greater long-term corrosion protection, your sub-structure is weatherproof, requiring zero maintenance.

Solid ABS Bottom Pan

The ABS Sealed Base is an integral part of the support structure in a MAAX Spas®  hot tub. Its one-piece construction provides a rugged foundation that seals the bottom of the spa to lock in heat, seal out moisture to protect from rot, and protect the spa from bugs, rodents, and other unwanted pests.

Spas without a Solid Bottom Pan

rotten-bottom-1rotten-bottom-2

Insulation

Northern Exposure Insulation System

Northern Exposure® is the ultimate hot tub insulation system. This unique thermal barrier technology recycles the free heat energy for more efficient heating and lower energy costs. All four sides of the spa, plus the floor and cover are lined with reflective copper material to reflect radiant heat energy generated from the pumps back into the spa. Heat is absorbed back into the plumbing helping raise and maintain water temperature. The exterior of the spa is then wrapped in BlueMAAX® insulation. Finally the entire exterior of the hot tub is wrapped in 3M Thinsulate™ Insulation, the same incredible material utilized in winter clothing. This three layer patented system ensures energy created by the spa stays in the spa.

BlueMAAX Insulation

Made from recycled natural fiber, it is approved by the U.S. Green Building Council. The insulation contains no chemical irritants, is treated with a borate-based solution to prevent mold/mildew growth, pest infestation, and acts as a fire retardant. BlueMAAX® replaces the urethane foam in “foam filled” hot tubs. (Foam filling produces volatile organic compounds (VOC’s) which are harmful to the environment.) These panels also allow for easy access and can be taken out and put back together to factory specifications right in your own home. “Foam filled” hot tubs require the foam to be chipped out to access vital parts of your spa and need to send the spa back to the factory to safely refill these holes.

badge-recycle-insulationbadge-warranty-insulation

Clean Water Technology

ClearMAAX Filtration

Perfect moments deserve perfect, crystal clear water. The water maintenance of your spa is made easy by the features of the MAAX Spas®’ complete water management system. Water is first drawn into the system from both the upper skimmer and lower foot-well areas. The High-Velocity Skimmer draws water into the filter system to capture surface debris and contaminants. Our 100% filtration means every drop of water is filtered. Our high volume filter cycle cleans your spa water 4 to 6 times per hour, providing a clean and enjoyable hot tub experience day after day. Glistening clean water, in a moments notice. It is programmable to your schedule and easy to set the right temperature.  The system lowers energy costs using the “Smart” control system which turns on your heater and pumps only to clean or heat.

CleanZone – Ozone

(Option on most spas)

Clean water is the cornerstone of spa enjoyment. MAAX Spas® CleanZone™ water purification system will automatically maintain healthy, crystal clear water while greatly reducing chemical maintenance. CleanZone™ is a cartridge ozone system that disinfects and cleans your spa. And best of all, CleanZone™ does not require any cleaning or maintenance whatsoever. Worry-free enjoyment, throughout the life of your spa.

CleanZone II – UV

(Option on many spas)

The CleanZone II™ system uses the power of UVC light, the same technology utilized in many communities around the world to purify drinking water. Clean Zone II™ kills 99.9%* of microorganisms, bacteria, viruses and parasites. This system is the perfect blend of hygiene, purity and technology.

Pumps

Direct Drive Pumps

MAAX Spas® hot tubs utilize industrial duty dual speed 56 frame pumps in all of their 240 volt models. The isolation pump mount  incorporates four shock absorbers to absorb vibration and noise. The 56 frame motor is 30% larger, more powerful and delivers higher water flow for better jet performance than the 48 frame motors found in most spas. They also run cooler for longer life and have lower amp draw for lower operating costs. High water flow with efficient, quiet operation – that’s better performance!

Flow Rate (gal/min)

6 bHP 5 bHP
High Speed > 250 > 225
Low Speed > 125 > 100

Worlds first fully Electronic Spa with no mechanical switches that can fail.

AeroMAAX Air Blower

(Optional)

airmaax-blowerAeroMAAX is a direct air injection technology that awakens smaller blood vessels throughout the body and promotes blood flow by “vacillation” through a gentle, vibrating soft tissue massage. The jets are strategically placed throughout the spa, providing a softer touch to soothe, refresh and heal.

Lighting

Chromatherapy Lighting is designed to stimulate the therapeutic effects of color combined with hot water. Each color can target a specific energy center promoting balance and healing to soothe throughout the body.

  • Dynamic Underwater LED lighting – standard on all 300 and ‘R’ series spas
  • LED lit Waterfalls and Control Valves – standard on all 300 and ‘R’ series spas (not R51)
  • Led lit Cup Holders – standard on all ‘R’ series spas (not R51)

LED Underwater Lighting

Waterfalls

Cup Holders

Control Valves

Other Features

Waterfalls

The illuminated waterfall sets the perfect stage for an evening of relaxation or romance. The waterfall is not only soothing to listen to and watch, but also provides a tranquil feeling of water cascading across your neck and shoulders. Another reason to drift even further to a place where tension quickly fades away.

Modern Cabinet Design

DuraMaax™ is a state of the art wood-alternative material that has the look and feel of natural wood, without the maintenance. The material is impact resistant, impervious to weather or insect damage and will never splinter, crack or rot. The attractive exterior locks in heat and seals out cold air – providing a beautiful look and feel.

M7 Powerpacks

balboa-heaterAn advanced, state of the art spa controller provides the ultimate in ease of use, safety and reliability for every spa user. The Powerworks™ with M7 technology is a revolutionary new hardware/software platform that completely eliminates mechanical sensor switches and remote through-wall temperature sensors. The M7 platform features two identical solid state sensors that mount inside the heater manifold. These “Smart Sensors” accurately and reliably measure water temperature while monitoring critical water conditions without the possibility of failure due to mechanical switch malfunction.

Back to Top